The ACTION_LEVEL_MIN field within DT_ACTION_LEVEL_PARAMETER can be used to manage action level ranges such as a pH range. For example, using the Action Level management interface, a user can add the minimum and maximum pH for a specified range. The ACTION_LEVEL_MIN replaced the DT_ACTION_LEVEL_PARAMETER.MAX_YN field.
To use the Action Level management screen, follow these steps.
1.Select an Action Level Code.
2.Select the Action Level Parameters tab.
3.Add/Select a Parameter.
4.Enter the minimum pH value within the ACTION_LEVEL_MIN field.
5.Enter the maximum pH value within the ACTION_LEVEL field.
Note: ACTION_LEVEL and ACTION_LEVEL_MIN values less than one must have a zero (0) preceding the decimal point (e.g. .5 must be entered as 0.5).
Note: The Action Level Exceedance II Reports have a report parameter labeled Action Level \ Comparison \ Operator.
If ">=" or ">" is selected, then the Exceedance Flag is set If:
RESULT_VALUE >= (or >) ACTION_LEVEL
RESULT_VALUE <= (or <) ACTION_LEVEL_MIN
If "<=" or "<" is selected, then the Exceedance Flag is set If:
RESULT_VALUE <= (or <) ACTION_LEVEL
RESULT_VALUE >= (or >) ACTION_LEVEL_MIN
Copyright © 2020 EarthSoft, Inc • Modified: 01 Apr 2020