This article explains how to set up and import In-Situ Troll® 9500 data.
To set up the remapping for TROLL 9500, a remap record with the code 'In-Situ_TROLL9500' must be created in RT_REMAP.
To set up the units and CAS_RN remap details, open the RT_REMAP_DETAIL and enter each record with the following details:
•external_field: must be "unit"
•external_value: the unit value that is shown in the In-Situ file
•internal_value: the corresponding EQuIS unit value
•remap_code: must be "In-Situ_TROLL9500"
•external_field: must be "CAS_RN"
•external_value: the column header that is shown within the In-Situ section within EDGE
•internal_value: the corresponding EQuIS CAS_RN value
•remap_code: must be "In-Situ_TROLL9500]
1.From the Application Menu, select Show/Hide Tabs.
2.The Tab Manager window will appear, check the In-Situ Troll 9500.
The In-Situ Troll 9500 tab will appear in the tab selection list.
3.If the In-Situ tab is not available in the Tab Manager, go to the Configuration Plugin Tool and make the tab available, then repeat steps 1 and 2.
1.Select the Devices tab on the ribbon toolbar.
2.Select the In-Situ button.
3.In the dialog that appears, select In-Situ Troll 9500.
4. Click Open File and browse to the data file obtained from the Troll 9500
Note: In-Situ TROLL 9500 files need to be saved as *.txt.
The following data and its units must be present in the In-Situ TROLL 9500 file in order for it to be imported into EDGE correctly.
If "Well ID" is set in the In-Situ file, then EDGE will use this as the SYS_LOC_CODE and if this value is not set, it will default the SYS_LOC_CODE to the Test name value. Once the data has been imported, it will show within the In-Situ_TROLL 9500 tab.
For the data to be imported within EQuIS, a sample record is required for each test that was performed. The sample recorded date and time must be after the date and time of the last reading for the In-Situ Test, and the In-Situ_TROLL 9500 file must be in Unicode text (*.txt) format.
During the Create step in EDP and Enterprise EDP, a record will be created in DT_TEST and DT_RESULT for each value that is present within the In-Situ section. The import supports remapping of the CAS_RN and unit values to corresponding values within EQuIS.
Copyright © 2020 EarthSoft, Inc • Modified: 26 Mar 2020