Log Report options may be modified by selecting Edit> Options from the Boring Log Template Design window. The Log Plotter Options dialog box opens. Modify properties on the Page Layout tab and Options tab as desired. Click the Open button to save changes.
Page Layout Tab
World Length per Page Inch: Scale used for plotting of the downhole portion of the log report in world coordinates per page unit. Change the value of World Length per Page Inch to alter the size of the boring log on a printed page. Increasing the value will contract the log and reducing the value will expand the log over more pages, as discussed here.
Max. Above-Ground Height: This specifies the above ground height shown on the log to display casings that stick up above the ground surface.
Section Height: Height of log report sections in inches. The footer is placed at the bottom of the page and the downhole section height is set to the remaining space between the Title Block and Footer sections.
Margin: Page margins in inches.
Hatch Scale Multiplier: All of the hatch patterns in the log are multiplied by this scale to provide for global control over the hatch pattern scales.
Depth Units: Indicates depth units displayed on the axes and other locations.
Show Grid: Check to show the grid in the Boring Log Template Design window. All objects will snap to the grid points.
Grid Resolution: Spacing of the grid points in the Boring Log Template Design window.
Depth to Water (non-EQuIS database users): Select data field from Wells table that will be used for display of depth to water. This field is used in the downhole plots, where the depth to water has been elected to be plotted.
DT_WATER_TABLE.TYPE (EQuIS users): Select from the populated values of DT_WATER_TABLE.TYPE, to select DT_WATER_TABLE records deemed to be representative of the depth to water. All water depth values are presumed to be relative to the top of casing elevation specified in DT_WELL.TOP_CASING_ELEV.
Depth to NAPL: Select data field from Wells table that will be used for display of depth to NAPL. This field is used in the downhole plots, where the depth to NAPL has been elected to be plotted.
Screen Field Filter: Field for selection of displayed screens. This allows only a subset of the Screens table records to be used in drawing the screen in the Well Construction downhole plots. This might be useful when records in the Screens table contain sample intervals from a soil boring.
Copyright © 2020 EarthSoft, Inc • Modified: 30 Mar 2020